Single-Phase Auto Transformers with Hand Operation Mode

Single-phase auto transformers are used for the low-loss, continuous adjustment of mains-connected alternating voltages. With this component, the user is provided with a component which allows an optimum adjustment or regulation of currents and voltages at the lowest losses and thus low heat generation.
The same for three-phase current can be achieved by mechanical couplings of three control transformers.
The design of the current collector ensures a reliable contact output and by actuation an independent cleaning of the contact track.a reliable contact output and by actuation an independent cleaning of the contact track.

General Technical Data

Structure according to VDE 0552 / EN 61558-2-14
Operation Mode:
DB
Safty Class: 0
Protection Class: IP00
Isolation Class: B
Ambient Temperature: max. +45°C
Mounting: 4-Point-Flange-Mounting or Axial/ Center Mounting
Connection Type: Screw or Solder Connection
Test Voltage: Shaft Against Carring Voltages Parts 4kV
Rotation Angel: approx. 320°
Frequenzy: 50 / 60 Hz
Conformity: CE, RoH

Short List Auto Transformer by Current

         1. Chose input and output voltage

         2. Chose needed current via separation

         3. For dimensions click on type